CodingBox Tài liệu

Connecting a board

Đội ngũ của chúng tôi đang thực hiện bản dịch. Bài viết này tạm thời chưa có bản tiếng Việt và đang được hiển thị bằng tiếng Anh.

The CodingBox Driver is the universal link between the online application and a programmer board. It runs on Windows, macOS and Linux and lets the app talk to hardware from different manufacturers through one interface.

The connection selector

In the app, the connection selector lists what you can connect to:

  • the built-in simulator (always available, no hardware),
  • any programmer board the driver detects over USB.

Pick a board and the link indicator turns active.

Typical flow

  1. Start the driver.
  2. Plug the board into USB.
  3. Choose the board in the connection selector.
  4. Insert a module and work in the app.

Notes

  • One driver serves every supported board — you do not install a separate tool per device.
  • If a board is missing from the list, reconnect USB and check power, then reload the app.
  • See Supported models for the programmer range.

Nếu bạn phát hiện thông tin chưa chính xác hoặc lỗi trong bài viết này, hãy chọn đoạn liên quan và nhấn Ctrl+Enter để .